CG 2000 - thread trimmer for basting machine
Device especially studied for Pfaff 543-712/02, created to reduce costs and to simplify the exertnal and internal basting works, usually sewed with a skipping-stich flat-bed machine.
Device especially studied for Pfaff 543-712/02, created to reduce costs and to simplify the exertnal and internal basting works, usually sewed with a skipping-stich flat-bed machine.
Equipped with EFKA DC electronic motor.
- Low speed ( about 300 r.p.m. ) for stitch by stitch bastings.
- High speed (about 950 r.p.m. ) that shortens the time required for sewing normal bastings, with stich 4/5 cm. long.
- The advantage are: thread saving, shortening of the manifacturing time, good quality of the bastings.
It must also be remembered that the pieces to be sewed needs to be placed on the machine table only once. Each time the thread is cutted, the price of clothing shall just be moved to the next position.
- To cut the threads the operator simply has press slightly the machine footboard, and the thread trimmer will start, leaving the upper thread (needle), the lower thread (bobbin) and the threads on the piece of the clothing all of the same length (5 cm.). To stop the machine and starting the machine and starting the mechanism the footboard can also be pressed while the machine is working.
The use of the flat-bed basting machine, equipped with the component "Rasafilo cg 2000", does not require any particular operator training.